- extensions table (tenant-scoped, RLS): number, sip_password_enc
(AES-256-GCM via packages/shared/src/crypto.ts), caller_id, context,
sofia_profile, codecs, max_registrations
- apps/api/src/extensions: CRUD (POST/GET/GET:id/DELETE), protected by a
new generic PermissionGuard (@RequirePermission decorator), tenant
resolved only from the JWT (never trusted from the client)
- SIP password is returned in plaintext only once, in the create response;
toPublicExtension() explicitly destructures the encrypted field out
(not a spread) so it can't leak by accident
- b2bcall-fs-config now resolves real directory data: Tenant.telephonyDomain
-> Extension.number, decrypts the password, builds proper directory XML
including a dial-string param (missing it caused originate to fail with
MANDATORY_IE_MISSING instead of the expected USER_NOT_REGISTERED)
- pinned FreeSWITCH's 357737{domain} to a stable value (b2bcall.local) via a
vars.xml patch in the Dockerfile -- it previously used the container's
dynamic IP, which could never match a stored telephony_domain
- added HTTP Basic auth between FreeSWITCH and fs-config
(gateway-credentials, timingSafeEqual comparison) now that the service
returns real secret data, closing the gap flagged as pending in the XML
Curl phase instead of leaving it open
- found and fixed: PermissionGuard's constructor-injected Reflector came
back undefined at runtime under tsx/esbuild (unreliable cross-file
decorator metadata emission) -- fixed with an explicit @Inject(Reflector);
worth watching for in future guards/services run via tsx
- verified end-to-end: create extension -> originate user/<ext> reports
USER_NOT_REGISTERED (found, not registered) -> delete -> back to
SUBSCRIBER_ABSENT (not found); password never reappears in any GET;
unauthenticated fs-config requests get 401
- docs/EXTENSIONS.md
- apps/freeswitch-config (b2bcall-fs-config): Fastify service implementing
the mod_xml_curl HTTP protocol (form-encoded POST -> XML response),
containerized, no host port published
- reactivated mod_xml_curl in FreeSWITCH, binding restricted to
directory|dialplan only (configuration was removed after testing showed
it firing several unnecessary HTTP round-trips at boot for module
configs we don't need dynamic — matches agente.md's own 'don't put every
critical config through XML Curl' guidance)
- no extensions/dialplan tables exist yet (next phases), so the service
always answers 'not found' for now — this phase only proves the wire
protocol works without breaking the static vanilla config fallback
- verified end-to-end: user/8888 (nowhere) -> SUBSCRIBER_ABSENT via
fs-config; user/1000 (static vanilla extension) -> USER_NOT_REGISTERED,
proving FreeSWITCH correctly falls through to static XML when xml_curl
says not found
- docs/XML_CURL.md, including the not-yet-authenticated endpoint note (fine
while it only returns not-found; needs gateway-credentials before serving
real directory/dialplan data)
- packages/telephony: TelephonyProvider interface (agente.md secao 25) and
FreeSwitchTelephonyProvider implementation over the 'esl' library
(actively maintained, TypeScript-native, built-in reconnect-with-backoff
satisfying secao 195); normalizeEslEvent() translates raw ESL events into
the internal vocabulary (secao 24)
- apps/freeswitch-events (b2bcall-fs-events): permanent ESL connection,
resubscribes on every reconnect, publishes normalized events to the
'b2bcall:events' Redis pub/sub channel; containerized (Dockerfile +
docker-compose service) since its whole job is reaching the freeswitch
container by internal hostname
- packages/shared: reusable createLogger() (structured JSON per secao 189),
fixed a BigInt serialization crash surfaced by the esl library's error
stats
- found and fixed a real FreeSWITCH 1.11 default: without an explicit
apply-inbound-acl, mod_event_socket silently rejects any non-loopback
connection ('Access Denied, go away.') even with the correct password —
added a dedicated ACL (loopback + the Docker Compose network range, never
0.0.0.0/0) in infrastructure/freeswitch/overrides/autoload_configs/
- verified end-to-end with a local loopback test call: CALL_CREATED ->
CALL_ANSWERED -> CALL_ENDED observed on the Redis channel with the
correct callUuid and hangup cause
- docs/EVENT_SOCKET.md
- infrastructure/freeswitch/Dockerfile: debian:trixie-slim + SignalWire
packaged freeswitch-meta-vanilla, avoiding a C/C++ build on a 1.9GB RAM VM
- FREESWITCH_PAT used only via Docker BuildKit secret, apt credentials file
created and deleted within the same RUN — verified absent from the final
image with docker history
- minimal module set (agente.md secao 15): sofia, event_socket, commands,
dptools, callcenter, avmd, curl, local_stream, etc. mod_xml_curl installed
but disabled — it refuses to load without a configured gateway-url, which
will exist once b2bcall-fs-config is built
- entrypoint.sh rotates the Event Socket password away from the 'ClueCon'
default at container runtime (never baked into the image); fails loudly if
ESL_PASSWORD is unset
- port 8021 not published to the host; only reachable from other containers
on the compose network
- found and fixed: freeswitch-conf-vanilla is a Recommends (not a Depends)
of freeswitch-meta-vanilla, so --no-install-recommends silently produced
an empty /etc/freeswitch and a crash loop
- verified end-to-end: fs_cli status via ESL with the custom password,
default password rejected, expected modules loaded, healthcheck green,
~44MB RAM usage
- docs/FREESWITCH.md, docs/NETWORK_ARCHITECTURE.md (network_mode decision
deferred until a real SIP trunk exists)
- POST /auth/login, /auth/refresh, /auth/logout, /auth/select-tenant,
/auth/change-password, GET /auth/tenants — wired to packages/auth
- JwtAuthGuard + DomainExceptionFilter (401/403 without leaking internals)
- LoginRateLimitGuard: Redis-backed 5/min per IP and per email (agente.md
secao 149), safe across multiple API instances
- helmet + restrictive cors (deny-by-default) + global rate limit
- GET /health, /health/live, /health/ready checking Postgres and Redis
- changePassword() added to packages/auth for the mustChangePassword flow
- fixed REDIS_HOST/POSTGRES_HOST docker-compose-only hostnames not
resolving from the host process; added REDIS_URL for host-side use
- verified end-to-end with curl: login, wrong password / unknown email
(same generic error), authenticated route, missing token, refresh
rotation, logout revocation, and the 429 rate limit kicking in after 5
attempts
- packages/auth: Argon2id password hashing, JWT access tokens (jose),
opaque refresh tokens with rotation, generic error messages (no
user-enumeration via timing or message differences)
- roles/permissions/role_permissions/user_roles/sessions/audit_logs schema
(agente.md secoes 142-150); RBAC scope PLATFORM vs TENANT
- withUserContext(): narrow RLS exception so a user can discover their own
tenant_memberships before a tenant is chosen (login flow)
- userHasPermission()/isPlatformUser(): explicit service-layer RBAC checks
(roles/permissions tables are not RLS-protected — documented why in
docs/AUTHENTICATION.md)
- seed: permission catalog, 4 system roles, initial Platform Super Admin
(password written once to FIRST_LOGIN.txt, 600, outside Git)
- automated end-to-end test: login, RBAC check, refresh rotation, logout
- users + tenant_memberships tables (tenant-scoped)
- RLS policy on tenant_memberships using set_config('app.current_tenant_id', ...)
- withTenantContext() helper for transaction-scoped tenant context
- separate non-superuser app role (b2bcall_app): the default Docker postgres
user is SUPERUSER and always bypasses RLS even with FORCE, so the app must
never connect through the migration/owner role. Documented in
docs/TENANT_ISOLATION.md.
- automated isolation test proving tenant A never sees tenant B's data
